Hello,
I am trying to establish independent horizontal and vertical controls for my PGL point. When I import the PGL horizontal and vertical alignments together the elevation that is used at a given station is based on the intersected PGL horizontal alignment station. I need the elevation of the profile based on the corridor alignment station.
However, when separate horizontal and vertical controls are established the PGL point does not get defined. What am I doing wrong? Point Controls shown below.
X | 1 | PGLPOINT_R | 2331+50.00 | 2539+00.00 | Vertical | Alignment | BL_CL_COPY:PGLR | PGLRTV |
X | 1 | PGLPOINT_R | 2332+00.00 | 2539+00.00 | Horizontal | Alignment | PGLRT | PGLRTH |
X | 1 | PGLPOINT_L | 2332+00.34 | 2545+60.00 | Horizontal | Alignment | PGLLT | PGLLTH |
X | 1 | PGLPOINT_L | 2331+50.00 | 2545+60.00 | Vertical | Alignment | BL_CL:PGLL | PGLLTV |
UPDATE:
I had the bright idea of converting the horizontal alignment control into a plan graphic control. It did not resolve the issue. The horizontal control is shown in the Roadway Designer interface but the vertical control is not being applied. Adjusting the priority of the controls makes no effect.
====================================
MicroStation V8i (SELECTseries 2) 08.11.07.469
GEOPAK V8i (SELECTseries 2) 08.11.07.615
Windows 7 Enterprise Version 6.1.7601 SP 1