A GPK file was provided to us by a client (GPK A). An alignment from this GPK has been imported into Civil Geometry using Geopak SS3 08.11.09.493. This alignment was persisted to a secondary GPK file (GPK B). A Horizontal Alignment report was prepared for this alignment within the Civil Geometry or SS3 tools. A COGO print out was generated from the secondary GPK file (GPK B) .
These two reports do not describe the same geometry. It appears that Equations are being inserted at every PC in the Civil Geometry Horizontal Alignment report. However, the geometry in secondary GPK file (GPK B) matches the GPK file provided to us by the client (GPK A). The GPK alignments do not have Equations at the PC's.
The Civil Geometry Horizontal Alignment report is attached to this post.
Am I misinterpreting the report? What is going on here?