Clik here to view.
RE: Super Elevation
Hi Chris,This example is coming from Rail design, better known as Cant design. For my workflow in 3D I want to use SS3 instead of Railtrack because SS3 is more user-friendly.The main different between...
View ArticleSuper Elevation
Hi,it is possible to apply a Super Elevation in the following manner in SS3I want to make an offset of my centreline and from that offset I want to create the super elevations. See ImageThanks in...
View ArticleRE: GEOPAK-COGO POINTS
if they are just points with xyz, you can use the cogo tool import ascii
View ArticleRE: GEOPAK-DEFINE PROFILE
can you see the profile in cogo? if not, then, you did not store it with the draw profile tool. store it and it should show up
View ArticleRE: XS Labeler Error Message
Dale, can you try and see if the tool loads using another project/gpk file? what version of geopak are you running?
View ArticleRE: XS Labeler Error Message
It does not Nico. A coworker tried it on his machine on a completely different project and it didn't work. Weird thing is that I annotated this file twice before and it worked fine and when I went to...
View ArticleRE: CIVIL_PROJECTSETTINGSDGNLIBLIST variable doesn't work
Are you appending to the variable or setting it equal to the path where the file is? You may want to also make sure the path is in the MS_DGNLIBLIST and maybe that would help. But I have not seen the...
View ArticleCIVIL_PROJECTSETTINGSDGNLIBLIST variable doesn't work
In my workspace I've made a dgnlib with some Projectsettings. In the workspace the variable CIVIL_PROJECTSETTINGSDGNLIBLIST was set to the path of the file. Unfortunately the variable doesn´t seem to...
View ArticleRE: XS Labeler Error Message
Nico, deleting the directory under C:\Users\ yourusername \AppData\Local\Bentley\MicroStation\8.11 did not work.
View ArticleRE: GEOPAK-DEFINE PROFILE
Nico,Yes, you are correct, the Cogo window does not show the profile I am expecting. It appears the reason the profile was not getting saved was because I had spaces in the name. After changing the...
View ArticleRE: XS Labeler Error Message
the other thing I noticed is that your xs are too close together vertically. this can cause issues. can you recut the xs at the standard 500 feet distance vertically?
View ArticleRE: Cross Section Labeling
are you in the same office withcommunities.bentley.com/.../97074.aspx
View ArticleRE: Cross Section Labeling
is this the same office?communities.bentley.com/.../97074.aspx
View ArticleRE: Cross Section Labeling
ok. can you guys copy the dgn and gpk in the c:\temp folder and try run the labeler from there?
View ArticleRE: can the roadway "MODELER" be put back in the InRoads Explorer Menu
I'm trying to use the import .ird function in Power InRoads and it say, "Cannot locate plan element SCS. Geometry must be imported before importing corridor SCS_C"1. So I set actived my Horizontal and...
View ArticleRE: can the roadway "MODELER" be put back in the InRoads Explorer Menu
Okay, I think I found the answer to my question with this video for the simple workflow to creating corridor model:communities.bentley.com/.../9988.aspx
View ArticleRE: XS Labeler Error Message
Could there potentially be a cross section in the design file from a chain that no longer exist in the dgn file. This was a problem in Select Series 2. Cutting the cross sections in a fresh DGN file...
View Article