CONFIGURATION PROCESS ORDER
Hello,We are using Microstation SS3 and Power InRoads SS3.We are trying to understand the variable assignments in configuration files. We understand that the processing order of these files is as...
View ArticleRe: .tiw file for SDMS .cal
Just gave it a shot and this does work. Probably as close to an automated way as it's going to get.Thank you,Jeremy
View ArticleRe: CONFIGURATION PROCESS ORDER
Check out this link: docs.bentley.com/.../ustnhelp814.html In the section on "Levels of configuration variables" it notes that System gets loaded first, etc..Also, please be aware that the...
View ArticleMask Terrain Model in OpenRoads
(posted on behalf of user)In Openroads I have a corridor model and an existing terrain model vizualized in a 3d view. How do I clip out or mask the terrain model so it does not show in areas of cut?Thanks
View ArticleELEMENT TEMPLATE
Hello,We are using Microstation and Power InRoads SS3.We have several more questions relating to element templates as follows:1) We have developed an element template for a surface but do not see an...
View ArticleELEMENT TEMPLATES AND FEATURE DEFINITIONS
Hello,We are using Microstation SS3 and Power InRoads SS3 / SS2.We are trying to understand the concepts behind the role and purpose of element templates compared to feature definitions.We see that a...
View ArticleSS3 FUNCTIONALITY
Hello,We are using Microstation SS3 and Power InRoads SS3 / SS2.We have been experimenting with surfaces and have a few questions:1) Is level priority the preferred control for display order between...
View ArticleRe: InRoads View Stationing - Strange Behavior
Load the alg and xin attached. The active alignment is as good as any to use. I revised everything so that viewing it should also station it.Then station it using the View Stationing command. On the...
View ArticleRe: ELEMENT TEMPLATES AND FEATURE DEFINITIONS
A Feature Defintion is composed of two parts:The "feature defintion" which defines the nature of the feature being defined. For example, it is an edge of pavement, or it is a curb. These are rather...
View ArticleClipping reference in Open Roads
Dear All,I am trying to clip a corridor model using complex shape, it works fine if it consists of only line segments, when it has arcs i get a error message "select closed element only" . Is this a...
View ArticleUnderground Electric cable in OpenRoads Cross Section
I have proposed Electric cable along the road corridor and want to show the location in the proposed cross section. I added the Feature Line for each corresponding Electric Cable in Terrain Model...
View ArticleRe: Clipping reference in Open Roads
Hi,try to convert arc to linestring using Facet Curve tool.Regards, Krzysztof
View ArticleClik here to view.
Re: ELEMENT TEMPLATE
Hi,I may be able to provide an answer to some of your questions.1) Open the Element Template dialog. Select your Terrain element template, right click on the right hand panel and you should see...
View ArticleRe: ELEMENT TEMPLATE
4) that dialog is a Bentley Map dialog. It will only appear when you have activated Map. Map is gis software installed with the civil products.5) it is almost always advantageous to use dgnlib files...
View ArticleRe: Mask Terrain Model in OpenRoads
Hi,In such cases I find Create Clipped Terrain Model tool useful. Existing Terrain Model can be clipped with corridors.Adam
View ArticleRe: SS3 FUNCTIONALITY
Yes, level priority is the preferred control for display order. There is no option for display order within the element template itself.Which text are you working with that is too large? Contour labels?
View ArticleRe: Underground Electric cable in OpenRoads Cross Section
Watch these two videos about showing features in cross section:http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/8500.aspxAs long as the Feature Definition is set...
View ArticleMISSED NAMED SYMBOLOGIES REPORT
Hello,We are using MS V8i and Power InRoads SS3.We selected "Missed Named Symbologies.xsl" for a report of an old XIN file from SS2 release and wondered if the "Missed Named Symbologies" meant ones not...
View ArticleRe: MISSED NAMED SYMBOLOGIES REPORT
The "MissingNamedSymbologies.xsl" report displays Named Symbologies that are specified in a particular Style, but do not exist as a Named Symbology.For example, you might have a Style named "SEC". In...
View Article