InRoads SS2 and SS3 on the same computer
Can InRoads SS2 and SS3 be installed on the same computer with MicroStation SS3? If so, how does MicroStation know which version to use?Many clients will be requiring SS3 in the future, but legacy...
View ArticleRe: InRoads SS2 and SS3 on the same computer
Yes, it is possible, you will find hints in the product readme and here in the forum. This question was asked some weeks ago.You may set a <InRoads>.cfg file in the Microstation config folder...
View ArticleRe: InRoads SS2 and SS3 on the same computer
By default SS2 and SS3 would install in the same location. I assume you must install SS3 in a non default location. Is this correct.
View ArticleInRoads S&S Profiles Crossings
Hello All,On a profile, I'm trying to show the size of each crossing (e.g. 4" water pipe or 6" sanitary line) to scale. Can I control how the features are displayed on the profile? If so, how?...
View ArticleClik here to view.
Re: InRoads S&S Profiles Crossings
Are these features in a DTM? If so, in the Style attached to feature, edit the Surface Feature Symbology, and set the Profile Point to display a cell that represents your different size pipes. Then...
View ArticleRe: InRoads SS2 and SS3 on the same computer
InRoads?I believe Ss3 installs to \Program Files\InRoads Group (SELECTseries 3)\ while Ss2 installs to \Program Files\InRoads Group V8.11\I always start the InRoads products from their icons. Since the...
View ArticleRe: InRoads S&S Profiles Crossings
In another post, you mentioned not having a depth. You can drape features on a surface, with a vertical offset to assign an assumed elevation.Bonus Tip: If you add special text to the description or...
View ArticleInRoads S&S Sump Drop Inlets
Hello,I am currently using InRoads (S&S) (.stb) to model storm drains. I have a concrete barrier wall as a median and grated drop inlets on either side so I can be said to have an "infinitely" high...
View ArticleRe: Tracking Horizontal Alignments using InRoads SS3 and Open Roads commands
You can also use the Horizontal Geometry Report command located within Horizontal Geometry.
View ArticleRe: InRoads S&S Sump Drop Inlets
Can you post an SDB for us to test (and give the inlet ID)? I took a quick look at my HEC-22 2nd Ed. to see how the depth should be calculated for sag inlets and found an example (Example 4-14) for...
View ArticleRe: InRoads SS2 and SS3 on the same computer
Please refer to the following wiki article for more information:Can InRoads SS2 and SS3 be installed on the same machine?
View ArticleClipping Corridor Features
I'm using Power Inroads SS3 - 08 11 09 493 Why is it that when I use the corridor clipping tools and select a boundary only the components are removed and not the feature strings? Thank, Dan
View ArticleSnapping Issues
I'm using Power InRoads V8i SS3 Verson 08.11.09.493 I've been having an intermittent issues with snapping to points when placing horizontal geometry.Whether I tentative click first or not, the start...
View ArticleRe: Snapping Issues
Hi Evan,I logged a support ticket about this issue months ago (some time in May).It seemed that the response time of the geometry tools (in my case, I was looking at the Profile tools), was so slow...
View ArticleClik here to view.
[MX V8i SS3 linemode] Box content in profile
Hello,Is there any input solution for horizontal moving/offseting a box content in profile drawing?By default the annotation (i.e level) is center-aligned to point/pip (left part of screenshot).I need...
View ArticleRe: [MX V8i SS3 linemode] Box content in profile
In such case (profile or cross-section) I often use the CLUTTEXT parameter option. Because if the CLUTTEXT value is 0, the overlapping text should be moved automatically, in almost every drawing macro....
View ArticleRe: [MX V8i SS3 linemode] Box content in profile
I didn't mean moving overlapping text labels. I just want to move a text label - my goal is to annotate in the same box two values for one pip: one is on the left side of pip (level) and second on the...
View ArticleRe: Snapping Issues
I faced another issue with civil tools and snapping. For example, when I am designing vertical alignment I can snap to the begining of my alignment in profile view. But when I try to edit vertical...
View ArticleCrash occurs when changing the width of a "Simple" component in the Create...
InRoads V08.11.07.615MicroStation V08.11.09.357Windows 7 64 bitI receive a crash every time I perform the following workflow:Open Roadway DesignerChange Active SurfaceLock Active SurfaceOpen Create...
View ArticleRe: Crash occurs when changing the width of a "Simple" component in the...
*Workaround at the moment is to place the Simple component and then change the width with Point Constraints.*
View Article