I suspected you install InRoads SELECTseries 2 in the same machine.
Maybe you can try to edit this file …\Bentley\MicroStation V8i (SELECTseries)\MicroStation\config\system\load_inroads.cfg
You can remark (#) all the variables, except Load_InRoads_Ss2 = 1.
Load_InRoads_SS2 = 1
#Load_GeoPak_SS2 = 1
#Load_GeoPak_SS3 = 1
#Load_InRoads_SS3 = 1
Hope it helps.