Re: Upgrading from InRoads SELECTseries 2 to SELECTseries 3
Please note that SELECT Series 2 and SELECT Series 3 can be installed on the same machine so that you can continue working in SELECT Series 2 whilst learning about the new OpenRoads technology now...
View ArticleRe: InRoads SS3 - can not load a gpkDgnAT.2.0.dll
I suspected you install InRoads SELECTseries 2 in the same machine. Maybe you can try to edit this file …\Bentley\MicroStation V8i (SELECTseries)\MicroStation\config\system\load_inroads.cfgYou can...
View ArticleRe: InRoads SS3 - can not load a gpkDgnAT.2.0.dll
Thanks Jimmy,I forgot to change this cfg file to load SS3 and whenever I started Inroads SS3 from the start menu or an icon Microstation tried to load inroads SS2. After changing this variable in cfg...
View ArticleRe: I am getting an errore that sring intersection not exist
Hi Bachu sir,I think you are working on Hill road, some times this error may occur due to datumtry changing the scale from 2500:250 to 3000:300 or...
View ArticleRe: Upgrading from InRoads SELECTseries 2 to SELECTseries 3
I have found that any alignments created in SS3 lose their geometry information if you open the dgn in SS2.It appears that SS3 is not backwards compatible.Also, if you create an alignment in SS3 using...
View ArticleClik here to view.
Re: Upgrading from InRoads SELECTseries 2 to SELECTseries 3
Martin Young:The moral of the story is - if you start using the civil geometry tools in SS3 you will have to stick to SS3.Hi Martin,did you read or hear the opposite from anywhere? I think this is what...
View ArticleRe: Upgrading from InRoads SELECTseries 2 to SELECTseries 3
Hi Martin,There are new features in civil geometry in SS3 that have no equivalent in SS2. I'd suggest to transfer the SS3 civil geometry to the native product (ALG) for usage in SS2 with the...
View ArticleRe: Upgrading from InRoads SELECTseries 2 to SELECTseries 3
I noticed in SS3 that there is a Task Menu called Civl Classic that appears to have all of the SS2 tools. Is there any danger in using the Classic tools in SS3 on production work that was started in...
View ArticleRe: OpenRoads XML Reports
Chuck, Please look under C:\Documents and Settings\All Users\Application Data\Bentley\Civil\.
View ArticleImport .ALG into Geopak SS3
Is there any way to import a .ALG file (created with InRoads SS2) into Geopak SS3? I see all sorts of data file types that can be loaded into the Survey Book, but oddly no .ALG file type. Is there some...
View ArticleData Acquisition Lidar LAS file
I am using MicroStation V8i with GeoPakI have an existing ground lidar LAS file in UTM meters format.The microstation file I'm importing the data into is in US Survey Feet. Is there a process in...
View ArticleRe: Data Acquisition Lidar LAS file
Hi JAK:The conversion should be automatic. But there are a couple of known issues that cause the conversion to fail. These are fixed in SS3. If you import the LAS and find that the conversion to feet...
View ArticleRe: InRoads SS3 - can not load a gpkDgnAT.2.0.dll
Will this file "load_Inoads.cfg" be created by the SS3 installer?
View ArticleRe: InRoads SS3 - can not load a gpkDgnAT.2.0.dll
I created it for SS2 release by myself just to have a possibility to start InRoads from Application Menu in Microstation.Kindly,Adam
View ArticleClik here to view.
[OpenRoads] Two template drops without transition
Hello,I have a corridor where I need to start another template at the station where previous template ends and I do not need any transition between them. Like you have a road and you rapidly start a...
View ArticleClik here to view.
Re: [OpenRoads] Two template drops without transition
Hi,I have similar case with single template drop where I use display rules and parametric constraints to control displaying components.Please see attached screenshots.Regards, Krzysztof
View ArticleClik here to view.
Precision problem
Hi, I have a problem with Roadway Designer. When I'm generating a corridor I use all of options in Critical Stations.Let say I have the begining of the arc at 47+349.0401 (I get already defined...
View ArticleSS3 Geometry Annotation
Where do the settings come for display of horizontal annotation like stationing in SS3? I know that within each style you can turn on auto-annotate which defines if you want annotation on or not, but...
View ArticleRe: SS3 Geometry Annotation
Hi,you have to export your geometry to native format and then annotate. Currently, OpenRoads technology doesn't provide tools for annotating (possibly in future releases).Regards, Krzysztof
View ArticleRe: Import .ALG into Geopak SS3
Ken,GEOPAK can only import .gpk files, where InRoads can only import .alg files.Derricke
View Article