We have a situation that I tested today. When using "import advanced" all levels import as required, regardless of being a reference or local element. Importing specific levels from a reference file did not import the levels as I had used in the dialog box (file>import>surface), but different levels. If I used references and made a selection set of the required levels, then all was good, and if the elements were in the parent file, they imported ok too. I've attached two .dgn files: els-test an empty file and els-test-1240125 a file with breaklines on levels 1 & 3. Level 63 is a border and is what actually imports when I specify level 1. I'll go ahead and send my XIN file. I'm using MS version 08.11.09.292 and InRoads Site version 08.11.07.536. All work files and software files are local to my box. This issue first popped up on my co-worker's system and then failed on my system using a different parent file.
↧