Re: InRoads S&S Sump Drop Inlets
I have been relying on the report from the storm and sanitary program. I have also used a program called the hydraulic toolbox to double check some of them and as shown in the attached picture, using...
View ArticleClik here to view.
Re: InRoads S&S Sump Drop Inlets
InRoads Storm & Sanitary will compute the exact same spread with these values entered above (see image below) for on-grade spread (equation 4-2). So I believe the difference you are seeing is...
View ArticleRe: InRoads S&S Sump Drop Inlets
If this program is following this methodology then it looks like the inlet is only seeing the water coming across the road to the side of it. If the program does not let you input the longitudinal...
View ArticleRe: InRoads S&S Sump Drop Inlets
I would also encourage you to look at example 4-14 on page 4-67 where depth and spread are calculated for a combination inlet. It seems to confirm the method S&S is using. If you disagree, please...
View ArticleRe: InRoads S&S Sump Drop Inlets
I do not have a combination inlet. I have one up against a barrier wall like shown below.
View ArticleRe: InRoads S&S Sump Drop Inlets
Also to add to this conversation. I am needing to know if there is an area in this program where it will give me a report on the pipes that are not meeting the minimum cover I am specifying. I am also...
View ArticleRe: InRoads S&S Sump Drop Inlets
The command used to check pipe cover is Evaluation>Profile>Check Pipe Cover.In order to attach an inlet to a culvert, first make sure your Drainage Options are set to place a "Median Drop" inlet....
View ArticleClik here to view.
Re: InRoads Drainage - Crossing Features
There command is looking at the Style associated to the pipe to determine whether or not to display the projected line or just the crossing. Therefore, if you only want to see the crossing symbol, and...
View ArticleRe: Unknown DWG's loading
How are your settings for MS_CELLLIST, MS_BLOCKLIST or common for cells?
View ArticleRe: Component quantities and clipping references
I'm afraid that is how the software works. You still need cut cross-sections and add volume exceptions to calculate quantities along clipped corridor. And then you will need to calculate other elements...
View ArticleRe: Component quantities and clipping references
I have filed a change request on your behalf for this issue. The change request number is S-100291.
View ArticleRe: InRoads SS3 OpenRoads Graphics and MicroStation
There were some changes to the way that some civil data was stored between the betas and the official releases. Is it possible some of the old version of these elements exist in the files or the...
View ArticleRe: Unknown DWG's loading
MS_CELLLIST has 4 lines, MS_BLOCKLIST is empty.The files that loading when I'm opening the dgn are recognized to the reletive project.One more thing is that issue repeated in several diffrent project...
View ArticleRe: Component quantities and clipping references
Thank you Jacquelyn and Adam, Adam, you describe precisely, what I think what should be in Open Roads today. Quantities are a very important part of the tasks a Civil engineer has. Now it looks like...
View ArticleClik here to view.
Contours Smoothing Method
Hello there,I just have a simple question, is there any way that we can choose another method of smoothing of Contours in Inroads, for example in Geopak we have more than one one method of smoothing as...
View ArticleRe: InRoads SS3 OpenRoads Graphics and MicroStation
The only config vars that I have defined are; CIVIL_DEFAULT_LINEAR_STROKING, CIVIL_DEFAULT_STATION_LOCK, CIVIL_XIN_FILE, CIVIL_ROADWAY_TEMPLATE_LIBRARY, CIVIL_CONTENTMANAGEMENTDGNLIBLIST.caddcop - All...
View ArticleGEOPAK SS3 - XS Labeling/Annotation?
I am looking for a good "help document" that explains what is necessary for and the steps to take in order to label cross sections created by GEOPAK SS3. The cross-section labeler that I just became...
View Articlehow to export Cogo points to data collector?
How do I export cogo points to a txt file with (point name, northing, easting, elevation, code and note), so that I can use them in my data collector to stake points in the field?
View ArticleRe: Contours Smoothing Method
InRoads only smooths by the 3 point method. We don't have the options to select the Smoothing type similar to GEOPAK.
View Article