Re: add a new compenent to existing compenet InRoads
No ı havent got any problem with the creating a new component or template part. The problem is that I created a component with the end condition for excavation which includes a slope and a bench. but...
View ArticleRe: InRoads S&S Brick Curve
You are correct, using a curved concrete pipe to model the brick curve is the best option available in InRoads.
View ArticleRe: InRoads S&S Sump Drop Inlets
What I will actual be attaching will be considered a manhole above the box culverts not an inlet because it will not be taking in any water from the top, just from a pipe connected to it.
View ArticleS&S Profile Display, Pipe Cover, and Delete Ink lock
MicroStation V8i (Selectseries 2) - Version 08.11.07.443Bentley InRoads V8i (Select Series 2) - V08.11.07.6151. When I display/create my drainage structures on my existing profile, whether or not...
View ArticleRe: InRoads SS3 OpenRoads Graphics and MicroStation
I guess the answer to that would be yes, all of my DGNLIB's are from an earlier version. I'm curious as to how that would effect this specific issue. All of my DGNLIB's just contain levels or element...
View ArticleRe: InRoads SS3 OpenRoads Graphics and MicroStation
Well, you could create a new empty dgnlib and export all of the templates and levels and reimport them into the new dgnlib and see if that fixes it.No Civil Cells?
View ArticlePlan and Profile generator: CIV_STARTSTATION and CIV_STOPSTATION
HelloWe are using the Plan and Profile generator in Inroads to create drawings. Each drawing is based on a template file and a title block data file where CIV_STARTSTATION and CIV_STOPSTATION are...
View ArticleGEOPAK Survey SS3 - labeled vs. stored coordinates differ
I noticed a discrepancy between the stored elevation (information displayed when hovering over a point) vs. what GEOPAK is labeling as the elevation. As I dug further I discovered that neither value...
View ArticleClik here to view.
Survey with numeric codes for breaklines
Hi, Today I received a measurement where breaklines where separated with a numeric code. Problem in PowerCivil what I know is that the program looks to digits when automatically connecting points. Is...
View ArticleInroads SS2 Drafting - Terminator Size
Without choosing a cell, what is controlling the size of the filled arrow terminator that is used under settings in the drafting tool in Inroads. Is there a way to control the size of arrow head...
View ArticleGEOPAK SS3 Model - Feature Definition drawing on Default level
When Corridor Modeling and showing cross-sections I was having the issue of a certain surface feature always drawing on the active level rather than the level that it was supposed to as defined by an...
View ArticleGEOPAK SS3 - XS Sheet Label Symbology
I am trying to use GEOPAK SS3 for a production plan and here is my latest issue.I cut XS cells successfully in SS3. I then used GEOPAK SS2s cross-section sheeting tool while in the same MS session...
View ArticleClik here to view.
Re: Inroads SS2 Drafting - Terminator Size
There are two main methods to change the size of the symbol terminators on the InRoads Drafting Note tools. There is a scale setting in the "Edit Named Symbology" dialog that will directly change the...
View ArticleRe: Inroads SS2 Drafting - Terminator Size
I tried the changes and the terminator stayed the same size.
View ArticleRe: Plan and Profile generator: CIV_STARTSTATION and CIV_STOPSTATION
Hi,Did you consider changing your Station format within Project Options, Units and Format before running the Plan and Profile generator?Sanders
View ArticleRe: GEOPAK SS3 Model - Feature Definition drawing on Default level
I'm not really sure what I did, but things are working as expected now. I think it had something to do with dgnlibs that were or were not being loaded.
View ArticleRe: GEOPAK SS3 Model - Feature Definition drawing on Default level
G'day Josh,For what its worth, I've seen similar scenarios many times while in the (ongoing) process of developing a design environment for OpenRoads. It is frustrating and very finicky. Like I wrote...
View ArticleRe: Survey with numeric codes for breaklines
You may easily edit the *.fwd file with an ascii editor and attach the control codes for your numeric codes as you wrote. You also may mix numeric codes with alpha control codes, we're doing this as a...
View Article