RE: publish imodel from mx-openroads
When you create the i-model, both the 2D and 3D models are included in the file. Under Project Explorer, in the 'Model' tab, there is a dropdown that allows you to switch between the two models.If you...
View ArticleRE: Corridor Modeler Cross Section Labeling error "Object variable or With...
can you post your dgn and gpk file?
View ArticleRE: Openroads – importing horizontal geometry from drawing
Under Horizontal Geometry, use 'Complex by Elements' (A -1) and select the start element. This will create the geometry for you.
View ArticleRE: publish imodel from mx-openroads
Thanks Mark, when I open the i-model in the navigator it becomes a 2d file and I am not able to rotate it and view in 3d, this is why I opened a 3d dgn in the navigator first and reference the i-model...
View Articlepublish imodel from mx-openroads
Dear All,What is the procedure to export the finished 3d model from openroads as I-model. My openroads dgn file is a 2d file containing the finished 3d model, when i publish it as i-model and open it...
View ArticleRE: publish imodel from mx-openroads
In Navigator, with the Project Explorer, you should see both 2 and 3D models. I do not understand what you mean - it becomes a 2D file. That is not the case.In Navigator, do you see the Model tab in...
View ArticleRE: Openroads – importing horizontal geometry from drawing
Hi Mark,But 'Complex by Elements' only works with lines and curves that have been previously created in Openroads. I was wondering if there is a way to import complex chain (e.g. road edge) directly...
View ArticleRE: Openroads – importing horizontal geometry from drawing
To get the graphic into InRoads, just run the "Set Feature Definition" command and assign a Feature Definition that has "Auto Export" = True.
View ArticleRE: Power Inroads - SS2 - Surface - Delete Features
Size could very well be the case. As I mentioned, I could not locate a DTM over 8MB for testing. Did the process complete? Were the surface features deleted?
View ArticleRE: Openroads – importing horizontal geometry from drawing
The Create Civil Rule Feature is another option that can be used. This will assign Civil Geometry rules to elements created by tools other than civil geometry commands. For example, MicroStation smart...
View ArticleRE: Mx Road V8i (ss3) Feature Definition
Can you confirm the workspace setting you have selected when creating the project.
View ArticleRE: Drawing XS not as at the model.
I have filed defect D-130543 to have development look into the issue with the cross sections not appearing correctly. Since the Cross Section Viewer is correct, there appears to be some problem in the...
View ArticleClik here to view.
Drawing XS not as at the model.
Hello,I have this Corridor model:In the Cross Section mooel Preview we see this:And when we drawing the coss section We see this: - We try yo seperate teh chint to 4 corridors, and still we see the...
View ArticleClik here to view.
End Conditions not updating / deleting (GEOPAK SS3 - OpenRoads)
When I move or delete transitions or template drops in a corridor, the tie-in slopes are remaining. When I extend a different template drop into the area where the deleted template was, there appears...
View ArticleRE: Openroads – importing horizontal geometry from drawing
I used the 'Complex by element' on a smart line that I drew using standard MicroStation - It worked without any issues. I then also tried it on two lines with a fillet curve inserted (trimmed lines)...
View ArticleClik here to view.
Openroads – importing horizontal geometry from drawing
Hi,I was wondering if it possible to import horizontal geometry (complex chain) from drawing in Openroads, as it was possible in Inroads.It can be quite useful for point control, etc., and I wasn’t...
View ArticleConversion of LAS to POD differences - PowerGeopak
I recently switched from Microstation ss3 to Power Geopak ss2 (and ss3). The process to convert las to pod (eventual tin) while reprojecting from UTM to a GCS of my choosing seems to have changed...
View ArticleRE: Mx Road V8i (ss3) Feature Definition
workspace is set as C:\ProgramData\Bentley\Mx V8i (Select Series 3)\workspace\users\examples.ucf
View Article