RE: Convert station and offset to lat/long
I have geopak, but I am not aware of how to do the conversion. I've checked the help and I've googled, but have not found what I'm needing.I guess I essentially need a hand-holding through this...
View ArticleRE: Convert station and offset to lat/long
Jeff, I am an InRoads user and I have an effective workflow for me at least. Maybe it will help you or at least give you some ideas. It involves using Corpcon software to convert XY to LL. You are...
View ArticleClik here to view.
RE: Convert station and offset to lat/long
ok. do this1. open coordinate geometry in geopak, create a new job2. go to file > import ascii points3. set the dialog to match your excell or ascii file. (ie. columns, point number, station offset,...
View ArticleRE: SS3 OpenRoads - Alignment Cross Sections - Existing Ground Line
Hi Vern,When creating cross sections, the symbology for the existing surface is taken from the Element Template selected for that Terrain within the Terrain’s General section and then Template. Within...
View ArticleRE: Geopak PowerCivil Roadway Tool
Neil & Michael,Your responses forced me to start at the beginning of site modeler and assume I knew nothing about setting up a project. After finding a document from 2005 title Designing with...
View ArticleRE: PSPAD not working in MX Road (Select Series 3)
To get the input file runner working install the MX Bonus tools for MX v8i SS3 and make the change detailed in the wiki article below.Setting up Input File Runner for MX v8i SS3
View ArticlePSPAD not working in MX Road (Select Series 3)
Hi,I have installed MX Road V8i (Select Series 3) version 08.11.09.493. It has excellent features of 3D views, most powerful open roads, etc.As i tried to link with PSPAD to run input files by copying...
View ArticleGetting MXTools working for MX V8i SS3
I have installed V8i SS3 (8.11.09.494), the AU release. Under add-ins menu there is an entry for infraTools. Selecting that menu option results in a dialog instructing download and install from...
View ArticleRE: Getting MXTools working for MX V8i SS3
If you don't have an install of MX v8 SS2 installed alongside MX v8i SS3 you will need to make the change in the wiki article below to get the input file runner to work correctly.Setting up Input File...
View ArticleClik here to view.
RE: Blurry water pattern
Try setting your pattern units to "Master" and toggling on "Repeat". This will ensure that the image is repeated and not stretched (which would decrease resolution). If this does not resolve your...
View ArticleRE: satellite image from google earth to microstation
No, but I was told by Plexearth development team that Plexearth for Microstation is in their future plans.....Petr.
View Articlesatellite image from google earth to microstation
Is there some software like Plexearth tool for Autocad for importing color images from Google Earth also for Microstation.Thanks, Petr.
View ArticleExport to native using OpenRoads
Hi,I've been using openroads technology (microstation, power GEOPAK V8i (SS3)) to create a vertical profile. I have the vertical profile drawn and now I'm trying to export to native (geopak) and when...
View ArticleClik here to view.
RE: PowerCivil SS3 context menu when selecting
If you wish to disable the context menu, in MicroStation, go to Settings > Snaps > AccuSnap. On the General tab, toggle off Pop-up Info.
View ArticleClik here to view.
PowerCivil SS3 context menu when selecting
When selecting elements and holding left mouse key some kind of context menu pops up. Is it possible to adjust or disable it?
View ArticleGeopak SS2 vs. Geopak SS3 and OpenRoads
Here is a general question for those that have experience in both SS2 and SS3 Geopak. I have been toying around with the idea of moving to SS3 and get onboard the OpenRoads train. My question: Is it...
View ArticleOpenRoads - copy elements from corridor 3D model
Hello,Please, can you advice a little. Users of different disciplines need to copy choosen lines from corridor 3D model. They reference 3D corridor model to their files and try to copy linear features,...
View ArticleRE: Corridor Modeler Cross Section Labeling error "Object variable or With...
Alright Nico, I think we are on to something. I was able to run a test corridor with standard templates and the tool worked. Additionally, I was able to get the tool to work with one of our side...
View ArticleCorridor Modeler Cross Section Labeling error "Object variable or With block...
When I try running the cross section labeling tool out of the Corridor Modeling window I get an error Run-time error '91':Object variable or With block variable not set I have the options to "End",...
View ArticleRE: Plan and Profile Generator - Tracking to Alignment
Yes, the tracking command is functional in models that are created as a result of running the Plan & Profile Generator. Additionally, you might find this instructional video helpful as you get...
View Article