RE: Export to native using OpenRoads
Mark, the limit in cogo names is 15. Unfortunatelly, you will need to keep track of it as OpenRoads does not have that limitation. If you are always going to export to native, keep the COGO...
View ArticleNo Application Menu in MicroStation V8i SELECTseries 3
Can anyone assist in explaining why I do not see an application menu which would allow me to activate InRoads when I have MicroStation already open? Currently if I want to use InRoads I have to close...
View ArticleRE: No Application Menu in MicroStation V8i SELECTseries 3
Please take a look at the following wiki post. It will provide the answer yo your question:Can I Launch MicroStation and then Load InRoads SS3 from the Applications Menu?
View ArticleRE: OpenRoads - copy elements from corridor 3D model
If I understand your intent... you want to copy the feature lines into another 3D (or 2d) model or file.1. reference the 3d model of the corridor to the new file or model2. use the level display to...
View ArticleRE: OpenRoads - copy elements from corridor 3D model
Thanks for this workflow, Mike. I tested it and it worked perfectly.
View ArticleRE: Convert station and offset to lat/long
Thank you, Nico. It gave me some output to work with. One thing of note: my boreholes, which were my Point# selection, were not all numeric, so it gave me errors in a few places.1. Spaces are not...
View ArticleConvert station and offset to lat/long
I've got a long list of borehole locations measured in station/offset along an alignment. All of these are outside of geopak (in gINT and in a basic spreadsheet). I would like to convert them to...
View ArticleRE: OpenRoads - copy elements from corridor 3D model
Thank you Mike it works but it can not be a workflow it is workaround only.Mike, Jacquelyn, consider this true life example. There is an empty dgn file (corridors container) where a few corridors 3D...
View Article[Openroads] Closed components colors in a Wireframe
Hi,Does anyone share similar problem?In a Wireframe presentation, closed components colors are derived from active level. Colors are correct only when level named "Default" is active. However, Smooth...
View ArticleRE: InRoads with AutoCAD...
First check the InRoads CAD Platform Requirements in the "readme_InRoads.chm" file in the installation folder of InRoadsWithin the Windows InRoads Program Group you will find the "SELECTCAD...
View ArticleRE: Terrain Transparency
1. If you only want to dhange the transparency in the current file , use Level Manager to amend the transparency of the level 'E_Terrain_Triangle' to (say) 70%.2. To have this be the default, amend the...
View ArticleRE: Terrain Transparency
Mark, I appreciate the feedback but I don't think this addresses the issue I'm having. I attached a video that may clear things up. As you can see, transparency seems to be working fine until I...
View ArticleRE: InRoads with AutoCAD...
Thanks Frank.It looks like InRoads Ss2 is only compatible with AutoCAD on a 32 Bit system. It looks like InRoads Ss3 is not compatible with AutoCAD at all.Does this sound correct to you?
View ArticleRE: Terrain Transparency
Can I suggest that you put something behind the surface shown in your video - say a thick red line - and try the transparency again. I remember doing something similar what you have done, and seeing no...
View ArticleClik here to view.
RE: Terrain Transparency
Mark,I added a red line for reference and tried again. I also added a solid for reference. As you can see, the terrain still does not become transparent. This is not shown in the video, but I also...
View ArticleRE: InRoads with AutoCAD...
I thought my ears were burning...You are correct, that You can only run InRoads with AutoCAD when it is on a 32 bit OS. However, we were able to run Ss2 with Civil 3D 2009 on Windows 7 64 bit. From my...
View Articlesymbol
Dear friends,i want to add customized autocad symbol in to inorads and use as symbol for my point features..how can do it ?
View ArticleRE: symbol
In the Named Symbology Editor, under Default Point you should be able to specify a block as a symbol. The Default Point symbol will be used for Plan, Profile or Cross Section point display unless a...
View Article