RE: OpenRoads - Copy Vertical
Ok, I thought it would pick up the element profiles even from a reference file. I will have to try it out and perhaps see if there is another option.
View ArticleOpenRoads - Copy Vertical
Has anyone found a good way to copy vertical geometry from one file to another? For example, if someone develops vertical geometry in a scratch file and then wants to copy that vertical into a master...
View ArticleClik here to view.
RE: Create Terrain by Graphical Filter including clipped corridor elements
I had the linear and terrain feature definitions turned off - was that the issue? I re-attached the file with all of the feature definitions turned on. Below are two screenshots taken from the...
View ArticleRE: Create Terrain by Graphical Filter including clipped corridor elements
Oops, re-attached this time...
View ArticleClik here to view.
Create Terrain by Graphical Filter including clipped corridor elements
When I use the "Create Terrain by Graphical Filter", it includes corridor elements that have been clipped out. In the attached screenshot, you can see that the curb elements that have been clipped out...
View ArticleClik here to view.
RE: .NET Framework Error when launching GEOPAK
We can chime in on this as well. I had simply renamed the "Watercad.cfg" in the Microstation\config\appl folder to keep things moving. Today I installed the latest release (08.11.04.58) and patches....
View Article.NET Framework Error when launching GEOPAK
An issue came in today that I think will benefit the community to see troubleshooting techniques as we work toward a resolution.I am getting several .NET Framework errors when launching GEOPAK Civil...
View ArticleRE: Incorrect Distance Measurement - CG vs MS Element
Hi Marc,As Jason stated there should be difference in your values using Measure Along Element versus Civil Accurdraw’s Distance-Direction (which measures the distance between two points). While...
View ArticleIncorrect Distance Measurement - CG vs MS Element
I am getting different distance values when measuring the distance along an element between the Microstation dialogue box and the Civil Accudraw dialogue box.Refer to the attached video.I am measuring...
View ArticleRE: Inroads missing command 'Apply Template'
Here are several videos pertaining to Feature Definitions that you may find helpful:communities.bentley.com/.../7038.basic-settings-openroads.aspx
View ArticleInroads missing command 'Apply Template'
Hi allIn Inroads V8i SS2 there is a function under: surface > design surface > Apply Template.In Inroads V8i SS3 I miss that function! Where did it go? How to activate this command?Jean Castro
View ArticleHow to create pond
HiWhere can I find video which show how to create pond and volume calculate in InRoads ss3. I have PowerCivil for Denmark ss3Thanks in advanceSigfús
View ArticleRE: Bentley Power Inroads HELP !!!
The training workshops all normally specify the workspace on starting up and it is the workspace that contains feature definitions, standards and the environment parameters. On starting PowerInroads...
View ArticleBentley Power Inroads HELP !!!
hi,I am using Bentley power inroads, for a university assignment.My "feature definitions toggle bar" and the design "standards tool bar" is empty and there is nothing I can select.this is features in...
View ArticleRE: Inroads missing command 'Apply Template'
Hi JacquelynTx for the video's.In my project explorer there is no 'Civil Standards' tab. I startup with my own projectconfiguration (pcf) and userconfig (ucf).How to get this tab 'Civil Standards' ?Jean
View ArticleControling Corridor Quantities report
Hello,There is a way to control the report that we getting from the "Corridor Component Quantities".examples:1. Don't report about critical section's (pic1.png is attached)2. Creating the report on...
View ArticleRE: Inroads missing command 'Apply Template'
See this forum post yesterday regarding the Project Explorer and how to change the settings:communities.bentley.com/.../96239.aspx
View ArticleRE: Create Terrain by Graphical Filter including clipped corridor elements
A workaround may be to create the terrain model from a graphical filter made up of the 3D model components and not the features. I will log a defect on the other method you are using as I am not sure...
View ArticleClik here to view.
Create Terrain by Graphical Filter including clipped corridor elements
When I use the "Create Terrain by Graphical Filter", it includes corridor elements that have been clipped out. In the attached screenshot, you can see that the curb elements that have been clipped out...
View Article