RE: Using inroads to calculate volume
Yes. Each 5' contour line is on it's proper elevation in 3d. :)I've gone into InRoads and tried File>Import>SurfaceNamed the surfaceLoad from: LevelUse Element ElevFeature Style: ContourPoint...
View ArticleUsing inroads to calculate volume
I'm pretty sure I've done this before and I simply cannot remember the sequence of doing so. I have a base topo and am overlaying a final fill plan. Wanting to calculate the remaining fill, normally...
View ArticleRE: Controling Corridor Quantities report
1. The sections that are included in the report come from the setting in the corridor Design Stages. If you look at the properties for the Design Stage, there is a section to Include Critical...
View ArticleGeopak Drainage SS2 modeling of trench drain
I have been modeling an existing drainage system with GEOPAK Drainage using the available modeled structures that are made available by the Virginia DOT. I have a special situation where I am being...
View ArticleIR Ss2 - MS Ss3 - File got too big?
I was importing some Lidar LAS files via Data Acquisition, and suddenly I crashed, and now when I go to open the file, it says: "Unable to open design file. Contact your site administrator or technical...
View ArticleRE: Contour Labels
Hi ChrisI saw this post and it is more than a year since it was written, a bit long time without a solution for something like that I think.
View ArticleContour Labels
HiI have this terrain I have created with "Terrain Model" tools in open road tehnology (vers. PowerCivil for Denmark ss3)In element information I have label setting for major contour on with interval...
View ArticleRE: Contour Labels
That was my thought as well. Bentley seems to have stopped providing fixes between releases. Sometimes more than a year can lapse between releases so if you encounter a crippling defect you are left...
View ArticleRE: Cut-Slope Rounding in OpenRoads
This is the one flaw of rounding. I suggested a setting where you could specify the style for the added points, sort of how the feature overrides, but the final tie-in retains the style while the other...
View ArticleClik here to view.
Cut-Slope Rounding in OpenRoads
Attached is a snapshot of a corridor with rounding set for the cut slopes under the component properties. I am also using a feature override so the cut and fill lines are created. This seems to work,...
View ArticleMoving structure
HiWhy is that everytime when i move structure in profile and plan there is created a copy of both the structure and the pipe. Which I have to delete afterwardVers. PowerCivil for Denmark...
View ArticleRE: OpenRoads - Auto generate 3D
PaulUsing the features defined template definition along a best fit profile uses a hard coded definition. there is no way to set this to a specific design stage on placement.You can change the design...
View ArticleOpenRoads - Auto generate 3D
I'm generating 3D models by setting the Feature Definition Toggle bar appropriately. The template drop on the resulting corridor has a spacing of 32.8 feet. Is this a hard coded value or is it in a...
View ArticleRE: POWER GEOPAK-COMPOUND SLOPE GRADING
Ok, I see how to select the location for adding different slopes under Object->Edit Object->Slopes. I do not see a variable slope option only a dynamic slope option. However, not sure of the...
View ArticleRE: POWER GEOPAK-OBJECTS & MODELS
Ok, so if I go to Object->Edit->Slopes->uncheck Display with Object; my display of slopes does not turn-off as I would expect. I have noticed that getting all slope grading to display or not...
View ArticleRE: POWER GEOPAK-COMPOUND SLOPE GRADING
I used the wrong term. Dynamic slopes is what I meant.. You won't see the daylighting update until you click Apply. Set the slope parameters in the input fields, use the Locate button to set the...
View ArticleRE: POWER GEOPAK-OBJECTS & MODELS
Models do not have slope preferences. Slopes are computing using the object slope settings. I don't understand your question. Please clarify what you mean by "when the object is graded with a specified...
View ArticleRE: POWER GEOPAK-COMPOUND SLOPE GRADING
Ok, I have found the table under Object->Edit->Slopes->Dynamic Slopes.
View Article