POWER GEOPAK-COMPOUND SLOPE GRADING
Hello,I am learning Power Geopak V8i SS2.In an earlier post, the subject of grading compound slopes was my concern for not using the site modeler due to modeler preference overrides that would not give...
View ArticleRE: POWER GEOPAK-OBJECTS & MODELS
1) The object is graded with a side slope by: Element->Side Slope->select object, set slope criteria, select single element, To object, select Apply.2)...
View ArticleRE: POWER GEOPAK-OBJECTS & MODELS
The default slope settings in Modeler Preferences do not influence the model in any way. Those settings are applied as defaults when you create new objects. Once the object is created you can adjust as...
View ArticleRE: POWER GEOPAK-OBJECTS & MODELS
How objects are displayed is a combination of several settings which would require a lengthy explanation. I'll have to refer you to the help system on that topic.
View ArticleRE: POWER GEOPAK-OBJECTS & MODELS
So responding to second paragraph, the attached image shows the box that needs to be un-checked in order to disable the slope computations when object is merged into model?
View ArticleRE: POWER GEOPAK-OBJECTS & MODELS
I should have expected the help file to be pathetically vague.Slopes are always computed when an object is part of a model even if the slope parameter is set to none.I'll try to explain without going...
View ArticlePOWER GEOPAK-OBJECTS & MODELS
I am learning Power Geopak V8i SS2.I have been experimenting with object grading, several simple building pads and later a model to contain the pads and existing topo. I have noticed that when the...
View ArticleClik here to view.
RE: Controling Corridor Quantities report
Hello Chris,I attached a pic that showing the settings in the Design Stage.the report created with those settings, and we still getting the Critical Sections.how can I get rid of those Critical...
View ArticleRe: Controling Corridor Quantities report
In the screenshot I see the Default Design Stage is in the selection and you are viewing the properties for it. Is that the design stage assigned to that particular corridor you are reporting on?...
View ArticleRE: POWER GOEPAK-COORDINATE GEOMETRY
You'll want to use the Store Graphics tool under the Civil/Geometry menu.
View ArticlePOWER GOEPAK-COORDINATE GEOMETRY
Hello,I am learning Power Geopak V8i SS2.I am reviewing the Overview of Coordinate Geometry from the help menu, I am looking for a little direction regarding creating an alignment. If I want to create...
View ArticleRE: POWER GEOPAK-TRACE SLOPE PATH
When you datapoint and move the cursor, solutions are highlighted with a temporary graphic. When you have the desired solution highlighted,datapoint again and the graphic becomes permanent.
View ArticlePOWER GEOPAK-TRACE SLOPE PATH
Hello,I am learning Power Geopak V8i SS2.I am using the Trace Slope Path tool under Analysis in Site Modeler. I have successfully generated a Follow Slope path on my model and it displays as expected...
View ArticleRE: POWER GEOPAK-EDIT ELEMENT
The table will activate AFTER you select the reference element or surface. Try re-selecting the reference.
View ArticlePOWER GEOPAK-EDIT ELEMENT
Hello,I am learning Power Geopak V8i SS2.I want to edit an element and use the first option: Slope Offset from Site Element and use Slope Variable. There is a table to fill-out to define the variable...
View ArticleRE: POWER GEOPAK-ASCII POINT IMPORT
I had no problem with it. Settings shown here: screencast.com/.../L0p5xdFBmuiy
View ArticleRE: POWER GEOPAK-ASCII POINT IMPORT
I am still not getting a successful import, even tried a new file and opening the project. I must be missing something. Attached is an error message each time I open the coordinate geometry dialog....
View ArticleRE: POWER GEOPAK-ASCII POINT IMPORT
That waring is telling your there is no available COGO project file (.gpk) available for your project (based on the COGO file path settings). You should answer yes and create a file. Once created you...
View ArticleRE: POWER GEOPAK-ASCII POINT IMPORT
I do have a project file created, that is the problem I believe, but you tell me, you are the expert. And no it does not import.Yes, we are subscribed, but have been referred to discussion groups in...
View ArticleRE: POWER GEOPAK-ASCII POINT IMPORT
I meant no implication as to how much time you should spend on the forum. You are free to post anything and as often as you wish.There are many tutorials in the Bentley Learn course catalog that use...
View Article