RE: E9200 Cannot lengthen/truncate to a point outside the picture area
Managed to figure it out. Just had to draw another model up larger than the area of the alignment. Would be good if the help file gave more of an answer than "contact your MX supplier" though.
View ArticleE9200 Cannot lengthen/truncate to a point outside the picture area
Probably an easy one but I get this problem when trying to extend an alignment in MX ROAD. I thought it was strange when I chose a float straight with bearing and stopped quite short.How do I get...
View ArticleRE: GEOPAK-FILE CONVERSION
you should reference the dwg to a dgn with your working units. compare and you can scale and/or convert the units to match yours. what information is in the dwg file? spots, contours?
View ArticleRE: GEOPAK-CONFIGURATION
the smd determines the symbology of the survey and cogo elements. not for plan production.FDOT has an smd and if you use their configuration, it should automatically show up.the other issue of folders,...
View ArticleRE: plan area
What product and version are you running?What tools have you already tried?
View ArticleRE: Display of Cross Feature Causes Crash - SS3
This issue was logged as a defect. When an alignment (representing a utility line) crosses a profile at more than one point when using the "Profile Intersection Point" command, the program will...
View ArticleRE: GEOPK-SYMBOLS-PRINT
I don't know of a way outside of doing some screen captures of the dialogs. For questions like this that relate solely to the functionality of MicroStation, you might try posting on the MicroStation...
View ArticleRE: GEOPAK-FILE CONVERSION
Yes, the file contains just tin lines, contours, breaklines, spot elevations, hatch work. So based on your recommendation, all I need to do is reference the dwg file to the dgn created by the DOT seed...
View ArticleComputer Spec Question
Planning to get new workstations. We will be running Windows 7 and will use the machines for Microstation, Inroads and ESRI ArcMap. Seems like I read where some software programs don't utilize the...
View ArticleRE: Annotate bottom of a manhole
The manhole bottom elevation is not stored as an attribute in the database, so you'll have to use other commands, such as the Drafting>Place Profile Note command. The Place Profile Note command can...
View ArticleRE: Closing Inroads in Microstation ..........
Starting in InRoads V08.11.09.674, InRoads must be loaded and closed with MicroStation. The article below gives a little of the reasoning behind it. Looks like we might need to clean up some of the...
View ArticleClosing Inroads in Microstation ..........
SS3 Versions: Trying to figure out how to load Inroads from within Microstation. Prior to the last releases, you could use the "Applications" tab. Now it appears that Microstation has to start with...
View ArticleMicrostation SS3 starts InRoads won't...
I'm using Microstation SS3 (V08.11.09.578) and InRoads SS3 (V08.11.09.674). The way we're setup, I have to launch InRoads SS3 (which as actually Microstation with a command line option to tell it...
View ArticleNAN value
Cross Section Profile List report shows me NAN value for exixsting and proposed elevation of centerline for certain templates...what is wrong with it?
View ArticleRE: Copy/export from .xin
Hi Sigfus,You can use the Copy Preferences command to copy from one XIN to another. From Tools > Applications Add-Ins select the Copy Preference Add-In. Then, from Tools> Copy Preferences,...
View ArticleCopy/export from .xin
HiIs it posseble to copy/export from one .xin to another?I am using PowerCivil ss3 for DenmarkRegardsSigfus
View ArticleRE: S&S Reporting on Networks
We determined that it was custom reporting that was causing the crash. But what we haven't figured out is why the custom report crashes Bentley software when doing network reporting. Anyone have any...
View ArticleS&S Reporting on Networks
Whenever I go to report on a network using the "Outfall" option, it crashes my MicroStation. Does anyone have any clue as to why S&S doesn't like me? I am using InRoads 08.11.07.540 running on...
View Article