Announcing Bentley Subsurface Utility Engineering
We are pleased to announce the addition of Bentley Subsurface Utility Engineering to Bentley Systems’ Civil product portfolio. Leveraging our OpenRoads technology, Bentley Subsurface Utility...
View ArticleRE: Computer Spec Question
Hi Aucivil ,Please select (navigate to) the link below to review system recommendation for InRoads. Once you select the link, select Requirements from the left column. There may be additional...
View ArticleGEOPAK-GROUND PROFILE
Hello,I am new to Geopak V8i SS2.I have placed profile cells and ground profiles per the described steps:Application->Geopak->Road->Plans Preparation->Draw Profiles->select Dialog...
View ArticleRE: GEOPAK-DRAW PROFILES
That "Define" button in the project manager dialogue box is to define the "working alignment". Defining a working alignment will automatically populate some of the geopak tools with the definitions you...
View ArticleRE: GEOPAK-DRAW PROFILES
Ok, so when you say "working alignment" I assume this also means associated "Profile View", "Crosss Section View" and "DTM". So when I select the working alignment, profile, cross sections and dtm in...
View ArticleGEOPAK-DRAW PROFILES
Hello,I am new to Geopak V8i SS2.The workflow I follow for drafting a surface profile is as follows:Draw and Annotate Profile: Application->Geopak->Road->Plans Preparation->Draw...
View ArticleRE: Computer Spec Question
Thanks for the link, it has some good information. Guess I am looking for a little more detail. The site recommends Pentium based processors as a minimum but I want to be able to process large point...
View ArticleRE: GEOPAK-REMOVE ALIGNMENT REGIONS
Would the Station Chain tool work for you? See recording: screencast.com/.../QAsEHZizI5hQ
View ArticleRE: Update Drainage Profile error
Hi ChrisThanks for your respondIs it possible to change flow direction of the drainage? The flow direction is incorrect in my drainage.I have created new profile and when I try to change the structure...
View ArticleRE: GEOPAK-REMOVE ALIGNMENT REGIONS
Neil,I see that this particular command inserts a station equation but does not reverse the alignment stations values. So my last station 19+26.72 BK=0+00 AH but the opposite end of the alignment...
View ArticleGEOPAK-REMOVE ALIGNMENT REGIONS
Hello,I am new to Geopk V8i SS2.I have been using a workflow to eliminate regions in my alignment chain by going to Graphical Coordinate Geometry->Navigator->double clicking the chain in...
View ArticleRE: How to show Right of Way (ROW) in OpenRoads Cross Sections??
Ok. I didn't realize you could have more than 1 active profile - you can have an active profile per feature. What I also then did was in the Element Template, added a "Point Cell" to the ROW template,...
View ArticleHow to show Right of Way (ROW) in OpenRoads Cross Sections??
How can we show linear ROW limits in the cross sections from a plan view feature?An obvious way is to draw a component in the template and use point controls to follow your ROW alignment, however, I...
View ArticleSetting up D&C Manager
I am wanting to configure D&C Manager in Power Civil to conform to our CAD standards. Will I break any of the "out of the box" functionality such as with drainage, water & sewer, etc.? What...
View ArticleRE: GEOAPK- PLANS/PROFILE COMPOSITION ERROR
I deleted all my data and re-built my alignment and profile data from scratch. The error was resolved so is no longer an issue. I have to assume that the data became corrupt somehow. However, have...
View ArticleRE: GEOPAK-MOTIF PLAN AND PROFILE
I have figured this out. I was creating Motif files and all I needed to do was attach the files I already created. Also, there is a plan and profile Motif separately previously overlooked. Also,...
View ArticleGEOPAK-MOTIF PLAN AND PROFILE
Helo,I am new to Geopak V8i SS2.I have been learning the Plan/Profile Sheet Composition dialog. I have been successful getting plan and profile sheets to produce. However, when I try using the Motif...
View ArticleRE: GEOPAK-GROUND PROFILE
I believe this is figured out. "Draw Profile" command places the cell in file. "Ground Profile" command creates the Cogo data of the profile.
View Article