Re: Inroads (Ss3) - Average height of a surface
Well I would use ss2 dtm to View Surface Elevations with Mode set to All Points. Then you can select annotations copy and paste into Excell. Now with a single Excell formula you will obtain average...
View ArticleRe: OpenRoads - Corridor not intercepting ground
Thanks Adam - I tried this but to no avail. See the answer to Robert - I think I figured it out.
View ArticleRe: OpenRoads - Corridor not intercepting ground
Thanks Robert,The locate lock was not the issue. Here is my deduction. I have three CAD files I'm working with, Design, Geometry, and Terrain. In the CAD file everything looks fine graphically. However...
View ArticleInRoads Survey Ss2 and Earlier: Import UTM Points - Export State Plane US Feet
How can I import a CSV file in UTM 18N Meters into InRoads Survey and get coordinates in State Plane US Feet?I brought them in to a new model using the TIW that I had assigned the UTM 18N Meter...
View ArticleAnnotate feature in x-section
Hi,I have a surface created from imported elements and as such all the features are letter and number. They can't be distinguished in any other way exept by pointing from the graphic. In the same time...
View ArticleRe: OpenRoads - Corridor not intercepting ground
Ron: As chance would have it, I stumbled on a similar issue whereby if a rotation was being applied to a reference file, I was getting similar issues as you report. Defect D-123240.While my situation...
View ArticleRe: Annotate feature in x-section
This is why naming features is so important. I have a major client that has no feature naming convention, and even their survey features, which become surface features, have no display symbology...
View ArticleRe: OpenRoads - Corridor not intercepting ground
As I read this, I recently had to use a reference file geographic transformation. I hope the intent would be that these tools can work with just such data and not get "confused" by it.
View ArticleRe: OpenRoads - Corridor not intercepting ground
Caddcop. Yes, that is the intent. There is a bug though. The specific bug I reported was due to rotation in the transform. It is logged and in the pipeline. Pure translations seem to be OK. But,...
View ArticleRe: Reverse Curve/Transition
It should be in the Civil Geometry tools, not in the "core" InRoads tools.
View ArticleRe: Reverse Curve/Transition
I don't know if SS1 is similar to SS2 but mine is found in the Civil Geometry tools.
View ArticleRe: InRoads Survey Ss2 and Earlier: Import UTM Points - Export State Plane US...
When you have set your coordinate systems with plain Microstation then copy the point from you geo re-protected refernece to your "Maryland State Plane Zone US Foot " model.Then export the points with...
View ArticleRe: Transition Between Compound Curves
can I suggest you look in the "Help".Help>ContentsMXROAD Suite Online DocumentationMXROADHelpDesignAignmentAlignment - PrinciplesTransitionsClothoid transitions - at the bottom of the pagergdsPeat
View ArticleRe: Transition Between Compound Curves
Hi Peat,Thanks for the reference.I found the following points in that which relevant to the present case.• If two adjacent elements have the same hand (either left or right) part of the transition with...
View ArticleRe: InRoads Survey Ss2 and Earlier: Import UTM Points - Export State Plane US...
I tried setting that up but even with the import and export set, the coordinates were still UTM Meter, in the Fieldbook, save to COGO and XML Report.I could deal with State Plane Meter using transform...
View ArticleCivil Cell - Corridors not clipping
Any ideas on why corridors do not clip correctly when using a civil cell? I'm using the 'Basic T' civil cell provided with SS3. The intersecting corridors are using the same template/end condition as...
View ArticleClik here to view.
Plan View Labeler
"When using the Plan View Labeler, is there a way to put an offset from the origin when using a leader? (similar to a dimension line) In other words, I do not want the leader touching the line work....
View ArticleCivil Cell Basic T
Files for my previous post about the Basic T civil cell.It appears the radius returns are developed at about elevation 100 when the corridors are at a much higher elevation.
View ArticleRe: Plan View Labeler
I haven't tried this but here is a concept you might explore;Create a terminator symbol that masks part of the leader line and use that as the Active Terminator in the labeler settings.
View ArticleVideo Mouse conflict
We are currently experiencing a problem on new systems running Windows 7 with updated video drivers, where the mouse cursor seems to blank out portions of the pulldown menus within InRoads SS2 running...
View Article