Showing K value
Dear all,i am trying to show K value in profile but it is showing R value. please write to me. we are using V8iSreenivas
View ArticleClik here to view.
[SS3] CrossSection View - dimensions
Hi,I simply want to change text height used in temporary dimension line. Tried with annotation scale and active text settings. It would be nice to have possibility to add linear or element dimension ie...
View ArticleRe: Saving all settings
In addition to what Paul said;Once you load the RWK file in subsequent sessions, just go to...File > Save > Project...in the InRoads Explorer to save any-and-all changes you made to any of the...
View ArticleRe: Showing K value
Settings > DGN settings > Civil Formatting - in the profile panel set the curve parameter to K
View ArticleRe: Saving all settings
As Paul Cusack wrote you have to ADD your DTM- and ALG files to the project file, once!After this, it is working like a charm!and remember a RWK file is a text file only, which is storing your file...
View ArticleGeopak SELECTseries 1 and 2 side by side
Hi,We need to run both Microstation V8i Selectseries1 w/Geopak (Civil Suite) SELECTseries1 AND Microstation V8i Selectseries 2 w/Geopak SELECTseries2. I was able to install Microstation V8i SS1 and...
View ArticleExport StormCAD V8i to PowerCivil V8i Drainage - Missing Catalog References
I have a StormCAD network which I am trying to export into PowerCivil, however I get the following error message:" Project cannot export to drainage file. The project must contain all catalog...
View ArticleRe: InRoads Project Defaults Registry file...
I run across computers that default to regview as the default program that runs reg files. Try running the .reg file using the Open With option and then select regedit.
View ArticleOpenRoads - Referenced geometry
Any ideas? Or workflows?I can’t create a corridor with my geometry referenced. I'm prompted to "select" the profile element. However '<reset> to use the active profile' or setting the active...
View ArticleOpenRoads - Corridor not intercepting ground
The roadway (backbone) models but does not catch existing ground. The template is set to seek ‘active surface’. Also the command ‘set active terrain’ seems a little quirky, as it will not let me select...
View ArticleRe: [MX V8i SS2] Linemode CHM help problem
Hello Aleksander,Could you please check if in the ...\MX\MFW\in_help path the ismaster.chm and ismaster.chw files are present.Regards,Amita Shinde
View ArticleRe: OpenRoads - Corridor not intercepting ground
Try to add this terrain to Target Aliasing list as an alias for active terrain.I have the same issue and I am not sure whether this is WAD or a bug. I created a few 3D civil cells with linear templates...
View ArticleClik here to view.
Re: OpenRoads - Referenced geometry
Ron,A list of profile names is available to choose from the tool settings window. Take a look at the screenshot.Adam
View ArticleTransition Between Compound Curves
Hi,I am using MX Road V8i, SS2. I had problem when I am doing Horizontal alignment Design using Menu - Design/Alignment.I was trying to apply transition between Compound Curves (R1=1000,L1=172.972;...
View ArticleRe: OpenRoads - Corridor not intercepting ground
Ron: If you are bot able to select the referenced terrain model, make sure that the reference settings has Locate turned on for the reference file. If this is ON and you still can't select, then you...
View ArticleOpenRoads - End Area Volumes
hi,now I am struggling with Cross-Sections and End-Area volumes.I have an existing ground, there are some pavement structures of various depth that need to be removed (unsuitable material). In SS2...
View ArticleInroads - SS2 - Join Vertical Alignments
Hello all,I have been searching for a way to join vertical alignments using geometry commands, and am struggling. I have seen some legacy posts talking of 'copying' the vertical elements from one...
View ArticleClik here to view.
Reverse Curve/Transition
I am using InRoads V8i SS2 and trying to create a reverse curve between two tangents. Through help menu, I find a description for the Reverse Transition tool, but can't find it anywhere in the...
View ArticleInroads (Ss3) - Average height of a surface
I need to determine the average height of a surface. Is there a (easy) way in Inroads to do this?
View Article