Re: PowerCivil for NA (8.11.09.397 ustn / 8.11.07.613 InRoads) Survey Data to...
When I wrote Survey to surface, sometimes the points would get written as features and other times they were missing. But when they were written - they were listed in the Feature Properties dialog...
View ArticleRe: Auto-Place Tadpoles for Cut and Fill
The command Drafting > Draw Slope Direction Pattern will allow MicroStation graphics to be selected for annotation. By identifying a primary element, a secondary element, and a reference element, a...
View ArticleRe: InRoads 08.11.07.246 - transition problems
You have a Point COntrol acting on the CL point. It is a horizontal control causing the template to shift to the left. Look just before and after station 0+14.17 and note the purple box around the...
View ArticleRe: Corridor Editing
After reading this post, a Bentley colleague informed me of a video he had created and posted on youtube that demonstrates a procedure for alignment modifications. You can find the video here:(Please...
View ArticleRe: Auto-Place Tadpoles for Cut and Fill
I was looking for something that was automated to save me using the drafting tools after the surface has been generated. Maybe a function within roadway designer could be added to generate these?
View ArticleSS3 area template component quantities / volume
Is it possible to obtain component quantities report and volumes for an area template, if so how is it doneregards,Juan Solorzano
View ArticleClik here to view.
Re: SS3 area template component quantities / volume
Hi,there is a tool within the Corridor Modeling task menu called "Component Quantities". Its the first icon in the bottom row within that task group.It will report the component quantities.I've only...
View ArticleClik here to view.
Re: Different Triangle Volume between InRoads and C3D
Paul-PennDOT:If the above methods can not be improved upon, then Frank has the one correct method. Make a DGN, DWG or DXF file with only the triangle mesh in it and send that as your TIN or DTM....
View ArticleRe: SS3 area template component quantities / volume
Hi,I've tried with that tool but only works for corridor or linear templates
View ArticleRe: SS3 area template component quantities / volume
Hi Juan,to get reports with data you mentioned you have to run Cross Sections and then End Area Volumes. Do not forget toggle Create XML report.Regards,Krzysztof
View ArticleRe: Different Triangle Volume between InRoads and C3D
InRoads should always retriangulate the surface once the features have been imported. Again, it is a feature based product, not a triangle based product. This is WAD (working as designed).
View ArticleRe: InRoads Ss2 Based Products Crash When Using Feature Properties Dialog Box
Could you please verify what version of the product you are running?
View ArticleSuperelevation doesn't work with Display Rules
(Posted on behalf of Be Communities User)GEOPAK Road V08.11.07.536When display rules are added to the template, the superelevation does not work properly.
View ArticleRe: Superelevation doesn't work with Display Rules
When creating a template that has display rules, verify that each component that will potentially display on/off has its own control line/point control defined for each superelevation "definition".
View ArticleClik here to view.
Re: InRoads 08.11.07.246 - transition problems
Hi Paul! Thank you for your answer! It made us think more about point control, experiment with it and finally we came to the following result: However, the surface is no ideal as we need RD to...
View ArticleRe: Auto-Place Tadpoles for Cut and Fill
The command Drafting > Draw Slope Direction Pattern is the only method available in the product to create tadpoles. Unfortunately, functionality to automatically create tadpoles from Roadway...
View ArticleRe: InRoads 08.11.07.246 - transition problems
You need to add a "Key Station" to force the software to calculate a solution at this station value. To select this station value, you first need to generate a temporary surface from your Roadway...
View ArticleRe: Cross Section Labeling Error
You could also try the following but you do need to have full control set in your user privleges1.) Close all DGN files2.) Bring up the dos prompt and change directory ("cd") to the following...
View ArticleProject Defaults Not Being Saved
(Posted on behalf of BE Communities User)When user attempts to input a Project Default Directory in File > Project Defaults, the changes are not being saved. When they go to File > Open it is...
View ArticleRe: Project Defaults Not Being Saved
Project Default settings are stored in the Registry. I suspect that this issue is related to the user profile and/or permissions. As a test, please attempt to log on to the computer as another user...
View Article