Re: Sectioning Strings in Line Mode.
Hello Addis,Could you please specify what product and version you are running? I would also like to know what commands you are using to produce the issue you are seeing.
View ArticleRe: How to Perform Intersection Design in InRoads
Please note, the PowerPoint shown here is a suggested workflow consideration for 08.11.07.xx based Roadway Designer. This approach would not be the recommended approach for 08.11.09.xx based products....
View ArticleRe: Error 126 when launching InRoads
This didn't work for me. I have added the command line switch to the target path in the InRoads shortcut pinned to the Start menu and still get the same results. I have confirmed that it is also on...
View ArticleRe: Error 126 when launching InRoads
Hello Bruce,What versions of MicroStation and InRoads are you running?
View ArticleRe: Error 126 when launching InRoads
Hello! Versions MS 08.11.07.443 and IR 08.11.07.494
View ArticleRe: Clearance Assessment
Yes a clearance assessment would be needed against a kinematic vehicle envelope / structual gauge envelope
View ArticleRe: Error 126 when launching InRoads
Hello Bruce,Did you get a chance to verify if the Applications menu was added into MicroStation after you ran the command line switch? Are you working in a workspace? Do you by any chance have Geopak...
View ArticleRoundabout Tutorial
(Posted on behalf of BE Communities Member)Is there a tutorial or video available for Roundabouts?
View ArticleRe: Roundabout Tutorial
Yes, the online seminar, Roundabouts Made Easy, provides an overview of Roundabouts in SELECTseries 2.
View ArticleFeatures Zig-zig across Corridor
The point controls on the corridor modeling is not working as expected. We are getting a zig-zag effect when trying to apply a horizontal point control to a linear geometry control type.
View ArticleRe: Features Zig-zig across Corridor
This behavior is usually seen when a user has applied the Feature Name Override option (Point Properties) within their template and that feature exist on both sides of the alignment.
View ArticleRe: Error 126 when launching InRoads
Hi Andrea,The Applications menu is not being loaded into MicroStation. I am not working in a workspace. I do not have Geopak or WaterCAD. I have confirmed launching InRoads (which results on the...
View ArticleRe: Error 126 when launching InRoads
Hello Bruce,If you are unable to uninstall the product, you may run the following:support.microsoft.com/.../program_install_and_uninstallThis will allow you to uninstall the product and reinstall it in...
View ArticleRe: creating surface issue
Hi Tanner,did you get this sorted out?I tried to grab your file but was denied access to the site. If you have not got this resolved, and can get the data to me, I can probably help.
View ArticleClik here to view.
Re: Features Zig-zig across Corridor
This is not my case, I've tried with a very simple corridor model on SS3 (file attached) and the behavior is the same.regards,Juan
View ArticleRe: Features Zig-zig across Corridor
Please take a look at this postcommunities.bentley.com/.../88408.aspxthanks,Juan
View ArticleRe: Smooth surface representation
Hi everyone,i use Geopak for my DTM construction and have found that the best way of achieving a 'smooth' DTM is by creating a LATTICE as opposed to a TIN. This is the same as creating a grid as...
View ArticleRe: Contour lines jagged, not smooth
Hi everyone,i use Geopak for my DTM construction and have found that the best way of achieving a 'smooth' DTM is by creating a LATTICE as opposed to a TIN. Its the best way of removing 'sharps' that...
View ArticleRe: SS3 area template component quantities / volume
Juan,You do realize you can also just select the component(s) and get volume info directly from the Element Information dialog, under the section called "Geometry"? This obviously is not reportable but...
View Article