Re: Cross Section Labeling Error - Geopak Corridor Modeler
You can try a few things to potentially solve this problem.1. If you are not using a select series 2 version 08.11.07.536 or higher you may have encountered a defect attributed to having two(2) GPK...
View ArticleGEOPAK Corridor Modeler Draw Cross Sections from DTM
(Posted on behalf of user) when drawing surfaces from roadway designer the cross section at the last sta does not draw it only draws the point names is this a tolerance issue?
View ArticleRe: Saving Multiple RWK Files
Hello Mbachand,After testing this workflow, it appears that the second opened RWK file will write additional information in the file that will save the file but will also save the information from the...
View ArticleRe: GEOPAK Corridor Modeler Draw Cross Sections from DTM
This could very well be a tolerance issue. You can try cutting a cross section back a few feet along the model and see if the linework appears. You could also place a key station there where the...
View ArticleSS3 - overlay/stripping component problem
hello,I've noticed strange behaviour of overlay/stripping component when working with Inroads SS3 release. Overlay and stripping components are attached to the bottom of my template. Overaly top...
View ArticleCheck Horizontal Integrity ... why me and not you, oh, all mighty software?
Heeelp!I don't understand the utility of the Check Horizontal Integrity tool. I have a continuous alignment, but made in a non continuous way (because that a engineer does ... I change my mind, I try...
View ArticleClik here to view.
Existing Ground Cross Sections
Hello,I'm new to GEOPAK. I am trying to cut existing ground cross sections and keep running into the same error. "There are no Cross Section Cell to process with regards to current settings."I used...
View ArticleRe: Existing Ground Cross Sections
Jason,I am sorry to inform you that this is currently a defect in the version you are running.
View ArticleRe: Existing Ground Cross Sections
What version would you suggest that I download and install?
View ArticleClik here to view.
Re: Sectioning Strings in Line Mode.
Thank you Andrea for your kind reply. First I apologise for the inconvenience since what I posted last time didn't go well. I...
View ArticleRe: Saving Multiple RWK Files
That is interesting behavior and not what I would have anticipated. Do you think it would be beneficial to control which RWK file is saved?
View ArticleRe: Sectioning Strings in Line Mode.
Hi AddisHow are you creating the pavement design in MX, is it manually or using the Pavement Design tools?
View ArticleVertical Annotation is not annotating the alignment in InRoads SS3
(Posted on behalf of Be Communities User)InRoads V08.11.09.493When running View Geometry > Vertical Annotation, the alignment is not displaying the annotation in the profile.
View ArticleRe: Vertical Annotation is not annotating the alignment in InRoads SS3
Please verify that the geometry was created in the Native product or that the Civil Geometry has been exported to Native product to run this specific command. If the geometry was created with the...
View ArticleClik here to view.
"A smoothed alignment must be created before using this command" error...
(Posted on behalf of Be Communities User)InRoads V08.11.07.566I am using the overlay tools in the roadway modeler and after I use the ‘vertical adjustment settings’ command and then ‘process all’ I try...
View ArticleRe: "A smoothed alignment must be created before using this command" error...
It appears that this error message will occur when the smooth alignment cannot be created. This would occur when the user has Read-Only defined as their access rights. Please verify that the...
View ArticleRe: Sectioning Strings in Line Mode.
Hello Mr. WalshI created the individual pavement strings in line mode and section them using major option SECTION to creat pavement section strings...but i couldn't creat a single subgrade section...
View ArticleRe: SS3 area template component quantities / volume
Yes Adam, thanks for pointing that out. However, just to clarify for Juan, said issue would not give bad values/results- it would just make those components non-quantifiable with this method. In his...
View ArticleRe: Existing Ground Cross Sections
FYI... we are tracking this problem as D-120640 and D-120337 in our database. They are scheduled to be fixed in the first update of SS3, post 08.11.09.493 (no schedlue for this update right now, but...
View Article