Clik here to view.
RE: auto cad drawing in mx road
Following are the steps to convert the AutoCad elements to MX strings using the MXConversion option: 1. From the CAD menu, select 'File > Reference', from the 'References' dialog box select 'Tools...
View ArticleRE: Drawing XS not as at the model.
I cannot see any particular reason this is occurring at the stations in question and I cannot put my finger on why it would reverse the terrain and corridor in these sections but I can reproduce the...
View ArticleClik here to view.
Drawing XS not as at the model.
Hello,I have this Corridor model:In the Cross Section mooel Preview we see this:And when we drawing the coss section We see this: - We try yo seperate teh chint to 4 corridors, and still we see the...
View ArticleClik here to view.
Terrain Models from Point Clouds Issues
Hi,There are some issues with Point Clouds and Terrain Models and I believe it is not WAD.1) When we create Terrain from Point Cloud our source *.pod file is imported to temporary Point Cloud.xyz file...
View ArticleRE: Terrain Models from Point Clouds Issues
This video may help with your workflow on combining and creating new clouds from a given shape (i.e. fenced area)www.youtube.com/watchHTH
View ArticleRE: Power Inroads - SS2 - Surface - Delete Features
Thanks for the suggestions Sanders. I checked a few of those out, however when i tried out the command myself i noticed that my fence is not narrowing down the features listed in delete feature. I...
View ArticleRE: Debugging Templates (inroads 8.11.07.494 SS2)
Thanks for the recent responces to my post. Time and other events have turned my focus on this to other pressing matters but I will return to address more fully your offerings. But in short, I think...
View ArticleDebugging Templates (inroads 8.11.07.494 SS2)
Greetings.Because InRoads templates are effectively logic driven (as I perceve them) the success or failure of a complex multi surface construct seems to be in direct relation to the builder's...
View ArticleGEOPAK DTM Tools - Trench Volumes output
I am trying to use the Trench Volumes tool in GEOPAK DTM Tools in conjunction with GEOPAK Drainage. I am trying to use this tool to calculate the trench backfill for each individual link. The output...
View ArticleRE: GEOPAK DTM Tools - Trench Volumes output
There is currently no direct way to get the Backfill Volume per individual pipe/link. This is a hard coded report in the software.
View ArticleRE: Create Profile By Constant Elevation doesn't work
What product and what version are you using?
View ArticleRE: Side slope not matching up
Where is the mismatch? If it is the junction area, does the civil cell used (assuming a civil cell) have the same slope conditions as the main template? Does the main road have superelevation that...
View ArticlePower Inroads - SS2 - Surface - Delete Features
Hello,A user has brought to my attention that when attempting to Delete a group of features from a fairly large .DTM the command seems to require a large chunk of time, he has waited in excess of 10...
View ArticleRE: Power Inroads - SS2 - Surface - Delete Features
Hello,Place your fence, select Delete Feature command and then select Inside as your Fence Mode. Select your features to be deleted and Apply (you will receive the Delete selected feature dialog) and...
View ArticleRE: Create Profile By Constant Elevation doesn't work
Let me look into this a little more but I was able to reproduce the problem. As a workaround, I was able to set the elevation to a positive value to initially create it, then open a Profile View of...
View ArticleRE: Side slope not matching up
Please take a look at attach .dgn. I use the same template to create a basic T civil cell. Looks like it match the transition slope but not where it intersect.
View ArticleCreate Profile By Constant Elevation doesn't work
Hi,Create Profile By Constant Elevation doesn't work when you put a minus value in to it (Elevation: - 0,50) it jumps back to 0.50.Is there for an work a round? Otherwise I have to check every single...
View ArticleRE: Create Profile By Constant Elevation doesn't work
I found an existing forum question regarding this issue. It appears that there is a bug and a defect has been filed for this issue. D-125902 has been filed for this...
View ArticleRE: Side slope not matching up
I think the problem is that along the main road, your template drop is (say) every 20m - so the main road finds the ground at points 20m apart, and joins them with a striaght line.Your junction...
View Article