genio file convertion
I wnt to convert the autocad curve detail into mx road as horizontal alignment if i enter in xcel file it had to genrate genio format so if i paste in notepad and convert to genio file please any one...
View ArticleRe: genio file convertion
What are you going to write? Only the XYZ, the 6-D master string, or the full 12-D geometry string?
View ArticleRe: GEOPAK SS3 - Extract profile from corridor surface
Thanks Michael. I didn't know about that tool. I'll have to edit my templates to have an "alternate surface" that is the top, finished grade.
View ArticleLimits of Construction in OpenRoads
Is there a process to draw plan view elements representing the limits of construction for a corridor model in OpenRoads? I see there are elements within the corridors on levels such as Grade_Cut and...
View ArticleRe: GEOPAK SS3 - Draw Profiles command equivalent
Hi Josh,the tool is there, but it is VERY counter intuitive (to me at least).The tool you are looking for is "Vertical Geometry>Project Profile to Element"The workflow is like this.1) The element...
View ArticleCreating Cross-sections - No Terrain showing
I've cut sections through a corridor so I can produce end area volumes. The corridor interfaces with my "Active Terrain" although when I cut the sections the terrain doesn't show.Any ideas on why this...
View ArticleRe: Creating Cross-sections - No Terrain showing
Do you have a display defined for cross section for the surface template/style?
View Article[MX V8i SS3] Vertical curves defined by length
Hello,I need to design a vertical curves in an alignment which are defined by its length. In result I should obtain a K-value as a result of slope differences and courve length. I found this...
View ArticleRe: Civil Cells are slowing down
ChristianA video has been posted...http://www.youtube.com/watch?v=FON_RZQoyOk&feature=em-upload_owner#action=shareThere are other ways to increase performance to use in conjunction with the...
View ArticleRe: InRoads SS3 OpenRoads Graphics and MicroStation
So I removed any civil config vars that may be defined during loading of MicroStation and I still keep getting the "Obsolete Civil Data Found".
View ArticleRe: GEOPAK SS3 - Draw Profiles command equivalent
Michael,For years I have been designing multiple profiles for various features, all on the same profile cell. Here is a typical SS2 workflow of mine.1. Use Draw Profile tool to cut an existing ground...
View ArticleRe: GEOPAK SS3 - XS Sheet Label Symbology
We do not recommend switching between versions on a project. All the tools you need for cross section sheeting and lableing are available in SS3, so there is no need to go back to SS2.The problem you...
View ArticleRe: InRoads Ss2 - View Geometry Options for Dynamic Geometry - Minor Bug.
What version are you working with or is this something you have noticed in SELECTseries2 and SELECTseries3? This could be a limitation because of it being a custom terminator since the program is...
View ArticleRe: InRoads SS3 OpenRoads Graphics and MicroStation
I redeveloped my dgnlib files using ms ss3. I also still get the obsolete graphics message.
View ArticleRe: GEOPAK SS3 - XS Sheet Label Symbology
There are too many tasks that are not found in SS3. Some of them that come to mind are:Plan/Profile Sheet cuttingPlan View LabelerDraw Profile ToolProfile LabelerDrainageUsing DDB to draw Pavement...
View ArticleClik here to view.
v08.11.09.459 Terrain model create from elements not going to both...
v08.11.09.459 Terrain model create from elements not going to both Road_EdgeOfPavement, please take a look.
View ArticleRe: [MX V8i SS3] Vertical curves defined by length
In interactive alignment, you can only use M value, Radius or K value. I think this is because you can have curve to curve connections, which you do not get in Quick Alignment (where the vertical curve...
View ArticleRe: open roads corrupt corridor
If you would like to upload your DGN file using our Secure File Update, I will be happy to take a look at it.
View ArticleRe: Open Road Profile Not Matching GPK
Thank you, I recreated the profile using parabola and it still did not update correctly so I ended up using the Road vertical alignment to fix it to match.
View ArticleRe: v08.11.09.459 Terrain model create from elements not going to both...
I use the wrong element "Draft_Corr_Final" instead of "Grade_Finished".
View Article