Re: SS3 Corridor Modeling Style Targets for End Condition
Well, since cross section view shows 3D graphic in dgn file then I would extrude ROW lines vertically into a Microstation surface or mesh. When done, you will see ROW in Cross-Section View.
View ArticleRe: Open Roads Survey for InRoads Survey Users Guide
Lou,I attended the Moving to Open Roads session at BE 2012. And have been going over it. I have also looked at the PDF from that page in your link.While both are good, they cannot tell you why an XIN,...
View ArticleRe: Template Library Slope Precision
Not trying to hijack the thread, and as an InRoads user, I am not sure where to set that precision for the Roadway Designer in GEOPAK, but the topic and Mike's answer reminded me of an issue or...
View ArticleRe: SS3 Corridor Modeling Style Targets for End Condition
Thanks for the ROW curtain idea.
View ArticleRe: Civil Geometry & Data Acquisition Tools
The versions mentioned here MS 08.11.07.180 and GPK 08.11.07.227 are one of the first SS1 builds (from early 2010); I installed MS build 08.11.07.180 (which is a combo of 08.11.07.171 +08.11.07.180...
View ArticleRe: Data Acquisition and XIN Lookup Tables
Hey caddcop. Thanks for the reply.You are correct. The text for style was not initialized. All I had to do was initialize the text and cusotm codes worked. It doesn't really matter what settings I use...
View ArticleRe: Template Library Slope Precision
FYI - I have used a few different workspaces and I am getting the same result. I have even used the prepackaged "Untitled" workspace and still no dice.
View ArticleFile Comparison Checker
Hello,We are using Microstation V8i SS3 and Power InRoads SS2 and are somewhat new to the products. We would like to learn if we can check the content of a file by comparison to the same file from an...
View ArticleRe: File Comparison Checker
Yes, you might use the Microstation Standards Checker and you might use the Design File History with References on old history revisions to visually watch content changes to your dgn files and models!
View ArticleControlling the MicroStation Version loaded with InRoads SS2
I have the need to keep MicroStation Ss2 and SS3 on my PC's and know I can use the -wsLoad_InRoads_SS2=1 and -wsLoad_InRoads_SS3=1 command line switches to control which application menu loads, and...
View ArticleRe: File Comparison Checker
History can prove tricky with InRoads. Many displays are re-written that contain large amounts of data when a small area changes. A couple of edits to a DTM at different times will need re-display of...
View ArticleRe: Unable to install SS3 error 1603
Had a similar issue with upgrading from SS2 to latest Microstation SS3 on XP SP3 and it finished with error 1639. The problem was the same, that installer didn't update previous prerequisite pack...
View ArticleClik here to view.
Civil Cells - T-Intersections.dgnlib, Surface Error in Entry Turn "T"
The surface for the entry turn "T", There appears to be a defect in the surface/profile at the intersection of the main road and the side road.
View ArticleRe: Civil Cells - T-Intersections.dgnlib, Surface Error in Entry Turn "T"
I haven't looked at this cell but in general.... For construction of a civil cell to be used in a library it is not necessary to build it so that the reference elements intersect as they would in a...
View ArticleRe: Civil Cells - T-Intersections.dgnlib, Surface Error in Entry Turn "T"
This may caused by the reference element most likely using an extend to intersection.To fix this select the cell CL (Red line) open the properties / element information. > Under the Transition...
View ArticleRe: Civil Cells - T-Intersections.dgnlib, Surface Error in Entry Turn "T"
BTW... this really isnt a "fix" as the element is only reacting as it is supposed to. hopefully as we move forward this type of behavior will become common knowledge...check our youtube for Bentley...
View ArticleClik here to view.
Re: SELECTseries 3 and Workspaces
Chuck Lawson:Note, the posted link will be good for a few weeks.Hi Chuck -The link is dead already. Can you repost a new one? Thanks.
View Article[Ss2 & Ss3] Civil DA vs Civil Survey Scale Issues - XIN based.
While our Primary client is still not even 100% into XM, we are attempting to move forward using modified versions of the XIN files from their workspace. In those efforts, I am trying to get DA in Ss2...
View ArticleGPK Roadway Designer End Condition Exception Error
I am trying to enter an End Condition Exception, but nothing happens when I click the "Edit" button. I enter the description, station range, Apply To Left Override, and then add it without issues. But...
View ArticleSS3 Corridor Graphics
I like how the "perimeter" or furthest extents of a corridor is where the corridor graphic element is placed. This is especially helpful when using one corridor to clip another. However, it turns out,...
View Article